Front Desk Architects and Planners Forum
Nails, stitches and galvanized staples - Printable Version

+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Structural Elements of Building (https://frontdesk.co.in/forum/forumdisplay.php?fid=90)
+----- Forum: Reinforcement (https://frontdesk.co.in/forum/forumdisplay.php?fid=131)
+----- Thread: Nails, stitches and galvanized staples (/showthread.php?tid=1082)



Nails, stitches and galvanized staples - bekaert - 08-29-2014

Nails, stitches and galvanized staples

Advantages

Known good quality (Inchalam brand in Chile, Albañil brand in Peru, Puma in Colombia, Vicson brand in Venezuela, etc)
Complete mix of nails available at the main retailers
Produced and distributed by Bekaert's Latin American subsidiaries and joint ventures

Product description

High quality nails that offer builders a full range for wood carpentry. These include nails for roof trusses, partitions, ceilings, wood paneling and covering, and specialty nails for roofing materials and gypsum board.

[Image: imgnailwireautomaticnailingjpg.jpg]


Applications


General Nails for wood carpentry.
Roof Truss : Dims 4 x 8, 3 ½ x 9, 3 X 10, 2 ½ x 11
Partition Walls : Dims 4 x 8, 3 ½ x 9, 3 X 10, 2 ½ x 11
Ceiling : Dims 3 ½ x 9, 3 X 10, 2 ½ x 11
Wood Paneling/Covering : Dims 2 ½ x 11, 2 x 12, 1 ½ x 14
Special Nails
Roofing Nails with EPDM washer
Gypsum board nails