[Manish Jain]

8. Fire Escape
It is mandatory to leave 4.5 M for fire escape van in Front and rear setback. After 4.5 M if there is any architectural element is allowed if it is used for elevation treatment only.
Any architectural element will not be allowed to function, other than elevation treatment; which is not more than 50% of the setback length.




9. The above section of clause 8.8 part (viii) will be allowed only when there is 4.5 M wide fire escape van movement available on the ground floor.




10. Ramp is allowed in setback only if fire escape van is provided with 4.5 M wide movement space on ground floor.
 Ramp in front setback will be allowed only after leaving 6 M. 

 On subdivision of a plot, front, rear and back setbacks of the subdivided plot will be considered maximum obtained from; either from clause 8.2 table 1 or for the plot as a whole, without considering the subdivisions.  
 For non-schemed area or non-subdivided area, where setbacks are not decided, BPC (Building Plan Committee) will decide the setbacks.
 Height, B.A.R and ground coverage of the subdivision plot will be considered minimum obtained; either by considering the plot as a whole or by subdivided plot provisions in bylaws. 

 If two or more plots are reconstitution, setbacks and other building bylaws will be applied as per reconstitution only. Plots will not hold any individual identity with respect to bylaws.
 
 
 Except front setback; mechanical parking is allowed in rear and side setback after leaving 4.5 M wide for fire escape van movement.