Compressive Strength Test
#1

Compressive Strength Test

Fairly obviously, this is the ability of the masonry unit (brick or block) to resist crushing loads, eg the weight of the roof that the wall is supporting, plus the weight of the wall itself. The designer of the structure needs to be sure that the masonry unit will be able to carry the load being placed upon it, including any live loads.

The bricks, when tested in accordance with the procedure laid down in IS 3495 (Part 1) : 1992 shall have a minimum average compressive strength for various classes as given in TABLE 4.1 of IS 1077 : 1992
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)